ClearCube R Series Pentium 4 - Manual (Page 108)

98 • MVX Installation ClearCube Product Manual and Installation Guide
7. Click on the Quadro NVS tab. If the side window isn’t visible, click the green
arrow icon located in the left middle of the Quadro NVS tab. See Figure 49.
8. On the side window, click ClearView. Figure 50 shows the resulting screen and
the default 1x1 display configuration.
9. In the Select Display Configuration menu, select the configuration that matches
the physical layout of the monitors and click Apply. The recommended Preferred
Display Refresh rate is 3x.
Figure 49 Quadro NVS Tab
Figure 50 Default 1x1 Monitor Configuration