ClearCube R Series Pentium 4 - Manual (Page 111)

ClearCube Product Manual and Installation Guide MVX Installation • 101
2. Change the refresh rate on the Default monitor using the Monitor tab. This
adjusts the refresh rate for all the monitors connected to the MVX.
This behavior about the MVX should be noted.
• When changing RGB dial settings on the C/Port, the video flickers to black briefly
after each dial movement, as the video signal must be recaptured.
• The video sharpness and RGB dials on the C/Port apply to all monitors.
• In Windows XP, changing display settings causes a brief video flicker as the MVX
adjusts to the video signal from the Blade more frequently than necessary. This
behavior can also occur when the operating system is starting up or shutting
down.
• The tuning dial on the C/Port is very sensitive. Rapid movements may cause loss
of the video signal momentarily.