Dyras MGR-828C - Manual (Page 8)

MGR-828C
8
the mincing head. Fitting the cutting blade incorrectly can also strain the mincer. One side of the blade is flat,
the other is ridged. These ridges are the sharp edges of the blade and should be next to the cutting screen.
• Warning! Only ever use the ‘pusher’ tool when feeding ingredients into the mincer. Never use your hand
because there is a high risk of serious injury.
Please keep this instruction manual. If you give the appliance to anyone else, you must give them
this instruction manual, too!
MAIN COMPONENTS
1. Reversing switch: ON (normal) - R (reverse)
2. 3-way main switch: ON (normal) - 0 (off) - R (reverse)
3. Head mount
4. Appliance body
5. Head
6. Feed tray
7. Pusher tool
8. Mincing screw
9. Cutting blade
10. Fine cutting disc
11. Medium cutting disc
12. Coarse cutting disc
13. Attachments for kibbe preparation
14. Clamping ring
15. Sausage filling attachment
16. Release button for mincing head
POWER SUPPLY
The appliance must only be connected to mains electricity of 230V and 50Hz. Always ensure
the mains voltage where you’re using the appliance corresponds to the value shown on the
nameplate of the appliance.
USING THE APPLIANCE
Before use
• Unpack the appliance and remove all the packing materials.
User'sManual MGR-828C.indd 8 User'sManual MGR-828C.indd 8 2012.11.14. 15:22:49 2012.11.14. 15:22:49