Defibtech DDU-120 Series - Manual (Page 51)

43
DAC-530E-EN-BH
7 Event Viewing
DefibView is a Windows based software application that reads data stored on a DDC and displays
it on a personal computer. DefibView serves four primary functions:
• Enables emergency care personnel to reconstruct a cardiac episode from the time the AED
was turned on and connected to the patient until the unit is turned off.
• Enables a patient’s primary care giver to review the emergency episode.
• Allows Defibtech and regulatory personnel to reconstruct a cardiac episode for review of
device performance.
• Provides maintenance personnel with additional parameter information to assist in
troubleshooting a device suspected of malfunctioning.
DefibView is a stand-alone software application. It cannot be used with the AED in operation and
exists solely to support post-event review of the data recorded on a DDC or downloaded to a DDC
from internal storage. The DDC from an event should be transported to a medical facility with the
patient, allowing medical professionals to review the data.
For details about the features and use of the application, refer to the DefibView documentation.
7.1 Defibtech Data Cards
If a DDC is installed in the unit, every time the DDU-120 is turned on the following information is
recorded on a new file on the card:
• The time the AED was turned on.
• Other data such as: ECG data, time data, audio data (audio enabled cards only).
• Event milestones such as: motion detection, shock advice, shock delivery information.
This information can be reviewed using the DefibView application.