5 testing the scale performance – Flintec FAA-27 User Manual
Page 17
Advertising
FAA-27, Technical Manual, Rev. 1.1, June 2014
Page 16 of 21
4. Load Factory Defaults:
Descriptions
Command:
@011000240001025AA5C9
Set to factory default.
Response:
@011000240001CA
ACK
CHECKSUM CALCULATION :
CSUM = 0
– (Slave_Add + Function + … + Last_data)
(STX and CSUM are neglected while calculating CSUM)
Example
For Medium (1) filter:
@011000220001020001XX
CSUM = 0
– ( 01+10+00+22+00+01+02+00+01)
= 0
– 37
= C9
Command is @011000220001020001C9 < Carriage Return >
5.5 Testing the Scale Performance
You have to check the scale performance by testing the scale eccentricity, scale
linearity at loading up to maximum loading value, repeatability etc. before using it.
Advertising