Vertical Communications SCS 8324F - Manual (Page 103)

DSUII Attendant User’s Guide
August, 03 Comdial 93
8. ATTENDANT FEATURES
8.1 LCD Message Creation
When you are busy or are away from your desk, you can set a
message at your telephone that will be received by any LCD speaker-
phone within your system. Your system provides two default mes-
sages: “Back at . . .” and “Call . . .” In addition, you can add eight
customized messages for system wide use, or you can create up to ten
messages if you choose not to use the two default messages.
• To store the LCD messages,
1. WRITE your messages on the chart on page 95 (each message can
have up to 16 characters).
2. USE the letter code table on page 95 to assign a number to each letter.
3. WRITE these numbers on the chart line beside the message letters.
4. PRESS INTERCOM.
5. DIAL *#05.
6. DIAL a message location number (1, 2, 3, etc.).
7. DIAL # to clear current message.
8. COMPOSE your messages by dialing the two-digit codes that relate
to the letters.
9. DIAL * to save message.
10. REPEAT steps 6 through 9 until all messages are stored.
11. PRESS SPEAKER to end.