Vertical Communications SCS 8324F - Manual (Page 45)

DSUII Attendant User’s Guide
August, 03 Comdial 35
3.6 Camping On and Queuing
3.6.1 BUSY OR IDLE STATION, AUTOMATIC CALL-
BACK
If the telephone you have called on an intercom line is busy or rings
with no answer, you can have the system ring your telephone when
the called station becomes idle (if it was busy) or when there is any
activity initiated at that telephone (if it rang with no answer before).
• To camp on at a busy or no answer station,
1. MAKE intercom call.
2. SELECT CAMP.
3. Your telephone immediately hangs
up. When the telephone you called
becomes idle, your telephone will
ring with five short ring bursts.
4. PRESS INTERCOM when you hear
the ring bursts. The other telephone
will start ringing.
• To cancel automatic ringback,
—PRESS INTERCOM AND DIAL #6.
• To camp on at a station with a Do Not Disturb
condition set,
1. MAKE intercom call.
2. SELECT CAMP. A callback will occur when called station is no
longer set in the Do Not Disturb mode.
NOTE: If you make a call in the voice-announce mode and
receive no answer at the called station, press INTERCOM before
selecting CAMP button in order to camp-on at that station.
J Doe Is Busy
SOHVA CAMP NEXT
Selecting Camp-On