Vertical Communications SCS 8324F - Manual (Page 41)

DSUII Attendant User’s Guide
August, 03 Comdial 31
3.3 Automatic Dialing
This feature provides one- or two-button speed dialing using pro-
grammable buttons at which you have previously stored numbers.
There are two types of speed dial numbers: (1) numbers that you store
for your own use (personal speed dial numbers and autodial
numbers), and (2) numbers that the system attendant stores for
everyone’s use (system speed dial numbers).
• To automatically dial an autodial number from one of
the programmable buttons on your station, choose one
of the following:
1. PRESS programmed autodial button (line selection is usually a part of
the stored speed dial number).
2. PRESS SHIFT AND programmed autodial button (to choose number
stored as second choice at that button).
• To speed dial a personal speed dial number from the dial pad,
—While on hook, DIAL speed dial number on dial pad (0 to 9).
• To speed dial a system speed dial number from the dial pad,
—While on hook, DIAL * AND system speed dial number
(01 – 99).
NOTE: If you manually choose a line for dialing, press HOLD
before using a speed dial. If you place a call on hold prior to
using your speed dial, pause several seconds before you press the
speed dial button; if you immediately press the speed dial button,
the system will choose the line that you have on hold to place your
speed dial call.
OR
Speed Dial Numbers
DIAL desired number
for personal speed dial
DIAL and number
for system speed dial
✳
Autodial Numbers
PRESS button of
desired number
to dial directly