Vertical Communications SCS 8324F - Manual (Page 95)

DSUII Attendant User’s Guide
August, 03 Comdial 85
7.13 Toll Restriction Override
You can override one station’s toll restriction assignment by dialing a
programmed four-digit TRO code at another station prior to dialing
your desired number. When you do this, the system replaces the toll
restriction requirements of the station that you are using with those
that match your home station.
After entering a TRO code at another station, you will get your own
prime line or idle line preference and its accompanying toll restriction
assignment. You then have 15 seconds to dial an outgoing call. Once
you hang up from a call, you have 15 seconds to make another call
without re-entering your TRO code. If you transfer a TRO call or
place it on hold and pick it up at another station, the call belongs to
the new station.
• To use TRO at a station,
1. PRESS INTERCOM,
2. DIAL **6.
3. DIAL your station extension number.
4. DIAL your TRO code number (as is shown).
5. Within 15 second timeout period, DIAL desired outgoing line num-
ber.
6. HANG UP handset OR PRESS SPEAKER to end call. You will have
15 seconds in which you can make another call without
re-entering your TRO code.
• To clear the TRO code,
1. PRESS INTERCOM,
2. DIAL **6.
3. PRESS SPEAKER.