DekTec DTC-300 StreamXpress User Manual
Page 53
DTC-300-SP – StreamXpress
USER MANUAL
53
#1 PID-SVC-Bitrate:
The StreamXpress reads the TS information from the opened file and display the PID, Service
component type and bitrate of the services. The bitrate display help ensure the service/component
will fit the bandwidth allocated to the layer.
#2 Active layer:
For each component/service, the user can select which ISDB-T layer to assign the component. Select
by clicking in the A, B, and C column. Unless the “Allow PID in multiple layers” is ticked, each
component can only go in 1 layer.
#3 Map other PIDS to Layer:
If a component, has not been assigned the user can select A, B, C as a default layer assignment.
#4 Allow PID in multiple layers:
If this is enabled, a service or PID can be used in multiple layers.
3.5.12.2 ISDB-T parameters
This section allows the selection of standard ISDB-T parameters.
Variable
Type
Description
Details Diag
Broadcast
Type
Drop
down
Select the type of broadcast
#1
1
Mode
Drop
down
Select the mode for the ISDB-T broadcast
#2
2
Guard
Drop
down
Select the level of the guard interval rate
#3
3
1
2
3
4