ETA PEČENKA - Manual (Page 24)

II. DESCRIPTION OF THE APPLIANCE
(Fig. 2)
A – lid
A1 – 0/I switch with indicator light A5 – handle
A2 – inspection window A6 – steam escape opening
A3 – safety switch A7 – power supply cord
A4 – heating surface
B – pot
C – base
C1 – handles C2 – switch projection
III. PREPARATION AND USE
(Fig. 3 - 14)
Remove all the packaging material and take out the appliance. Remove any possible
adhesion foils, stick-on labels or paper from the appliance. Before the first use, wash the
parts that will come in contact with food in hot water with a detergent, rinse them thoroughly
with clean water and wipe till dry, or let it dry (see sec. V. MAINTENANCE). The appliance is
now ready for use.
Assembly of the individual parts
– Insert pot B into base C.
– Hold the lid by handle A5 and place the lid on pot B so that the handle is oriented towards
the projection in base C. The opening (i.e. safety switch A3) in the bottom part of the
holder must slide onto the switch projection C2.
Proceed in reverse order to disassemble/remove (or assemble) all the components.
CAUTION
An audible click sound indicates that the lid has been properly inserted in its place.
!
Place the assembled appliance on a flat, steady, smooth and clean surface at a height of at
least 85 cm, out of the reach of children (see sec. I. SAFETY WARNINGS). Leave enough
space to ensure sufficient ventilation. Make sure that the power supply cord is not damaged
and that it is not led underneath the appliance or over any sharp or hot surfaces. The socket
must be readily accessible so that the appliance could be easily disconnected from the
mains in case of danger.
Put the required ingredients into the pot (e.g. using a measuring cup or a spoon) as per
the recipe. The total amount of ingredients must not exceed 4/5 of the pot volume. When
preparing food which gains in volume while cooking, fill the pot to no more than 3/5 of its
volume. However, the minimum quantity of the processed food must not be less than 1/5 of
the pot volume. Clean the edge of pot B, as well as any other parts which got dirty during
filling, using a suitable cloth or paper towel. Also clean the inner upper edge of the lid and
make sure that the steam escape openings A6 are not blocked.
Connect the power cord plug A7 to the mains. Move switch A1 into position “I” (red control
light will turn on) and the appliance will switch on.
24
GB
/ 45