V. maintenance, Vi. environment – ETA PEČENKA User Manual

Page 27

Advertising
background image

PROBLEM

CAUSE

SOLUTION

Large amount of

steam is coming

out around the pot

edge

Openings

A6 in the lid

are blocked (e.g. by food

remains)

Check passability of the openings;

purge (i.e. make passable) the

openings using a suitable tool

(e.g. with a wooden skewer). See

Maintenance.

Lid

A was damaged (e.g.

because it has fallen to the

ground)

Contact the service department.

An unpleasant

smell is coming out

of the appliance

Impurities on the inner side

of lid

A

Check, or clean, the inner side of

the lid.

V. MAINTENANCE

(Fig. 15 - 17)

Unplug the appliance by pulling the power cord plug from the mains before any

maintenance!

Only clean the appliance once it has cooled down! Clean the appliance

regularly after every use! Do not use rough or aggressive detergents (e.g. sharp objects,

peelers, chemical solvents, thinning agents, caustic agents for cleaning ovens or other

solvents)!

To clean the lid, only wipe it with a soft wet cloth with a detergent. Make

sure water does not get into the inner parts of the appliance! Wash all the other parts

(i.e. pot

B and base C) in hot water with a detergent, and then rinse them in clean water

and let them dry completely. Never dry plastic mouldings over a heat source (e.g. heater,

electric/gas stove). If the power cord is soiled, wipe it with a wet cloth. It is common for

the surface colour to change in time. This change, however, does not have any influence

on the surface characteristics in any way and it cannot be subject to a complaint under

warranty!

CAUTION

Make sure that the bearing surfaces are clean and functional.

!

Storage

Before storage, make sure that the pot and any of its parts have cooled down. Store the

appliance in a safe and dry place, out of the reach of children and incapacitated people.

VI. ENVIRONMENT

If the size of the appliance allows, all the parts contain marking of the materials used for

production packaging, components and accessories as well as for recycling. The symbols

on the product or in the accompanying documentation mean that the electrical or electronic

product used must not be liquidated together with communal waste. To ensure the

appropriate liquidation take the used appliance to a collection point where it will be accepted

free of charge. Correct liquidation of the product helps to protect valuable natural resources

and helps to prevent a potential negative impact on the environment and human health

which can be the outcome of inappropriate liquidation of waste.

27

GB

/ 45

Advertising