Selecting a supported display mode – Lenovo Legion Y27-30 27" 180 Hz HDR Monitor User Manual

Page 20

Advertising
background image

Chapter 2� Adjusting and Using your monitor 2-7

Selecting a supported display mode

The display mode of the monitor uses is controlled by the computer� Therefore, refer to your

computer documentation on how to change display modes�
The image size, position and shape might be changed when the display mode changes� This is

normal and the image can be re-adjusted using automatic image setup and the image controls�
Unlike CRT monitors, which require a high refresh rate to minimize flicker, LCD or Flat Panel

technology is inherently flicker-free�

Note:

If your system has previously been used with a CRT monitor and is currently configured

to a display mode outside the range of this monitor, you may need to reattach the CRT monitor

temporarily until you have re-configured the system; preferably to 1920 x 1080 at 165 Hz, which

is a common display mode�
The display modes shown below have been optimized at the factory�

Table 2-2.

Factory set display modes

Address ability

Refresh rate

720 x 400

70 Hz

640 x 480

60 Hz, 72 Hz, 75 Hz

800 x 600

60 Hz, 72 Hz, 75 Hz

1024 x 768

60 Hz, 70 Hz, 75 Hz

1280 x 1024

60 Hz, 70 Hz, 75 Hz

1440 x 900

60 Hz

1600 x 900

60 Hz, 75 Hz

1680 x 1050

60 Hz

1920 x 1080

60 Hz,120Hz,144Hz,165Hz,180Hz(Over Clock)

480p

60 Hz

576p

50 Hz

720p

50 Hz, 60 Hz

1080p

50 Hz, 60 Hz,120Hz

1080i

50 Hz, 60 Hz

Advertising
This manual is related to the following products: