Lenovo Legion Y27-30 27" 180 Hz HDR Monitor - Manual (Page 26)

3-4 Y27-30 Flat Panel Monitor User’s Guide
Table 3-2� Troubleshooting
Problem Possible cause Suggested action Reference
The power indicator
is amber, but there is
no image�
The video signal cable
is loose or disconnected
from the system or
monitor�
Be sure the video cable
is connected with the
system properly�
“Connecting and turning
on your monitor” on
page 1-5
The monitor brightness
and contrast are at the
lowest setting�
Adjust the brightness
and contrast setting
on the OSD menu�
“Adjusting your monitor
image” on page 2-3
One or more of
the pixels appear
discolored�
This is a characteristic of
the LCD technology and
is not an LCD defect�
If there are more than
five pixels missing,
contact the Support
Center�
“Appendix A� Service
and Support” on page A-1
• Lines or images are
blurred in the text�
• There are
horizontal or
vertical lines
in images�
• Image setup has not
been optimized�
• The “Display
Properties” settings of
your system have not
been optimized�
According to the
resolution of the
monitor itself,
adjust the resolution
setting of the system:
1920 × 1080 @ 165 Hz�
“Adjusting your monitor
image” on page 2-3
Perform automatic
image setup� If
automatic image setup
does not help, perform
manual image setup�
“Selecting a supported
display mode” on page 2-7
When working in the
native resolution, you
may find additional
improvements by
adjusting the Dots Per
Inch (DPI) setting on
your system�
See the Advanced
section of your system’s
display properties�