Lenovo Q24h-10 23.8" 16:9 FreeSync IPS Monitor (Gray) - Manual (Page 15)

Chapter 2. 2-3
Adjusting your monitor image
This section describes the user control features used to adjust your monitor image.
Using the direct access controls
The direct access controls can be used when the On Screen Display (OSD) is not displayed.
Note: The direct access controls are coloured.
Table 2-1. Direct access controls
Icon Control Description
1 Volume decrease Decrease the volume
2 Volume increase Increase the volume
3
Input change Switches the video input source.
DDC/CI
Press and hold for 10 seconds to enable or
disable the DDC/CI function
Exit Exit and return to previous level
4
Display Mode Direct access to switch display mode.
Increase/Up
Press to move lighting-indicator on main menu
up from active item to last one.
Press to increase current values on adjustment bar
5
Brightness Direct access to Brightness adjustment.
Decrease/Down
Press to move lighting-indicator on main menu
down from active item to next one.
Press to decrease current values on adjustment
bar
6
Menu
To access OSD menu.
Press to confirm selection.
Press and hold for 10 seconds will lock
menu/un-lock menu.
Enter
Press to enter next level on main menu/sub menu
status or enter previous level on adjustment bar.