Lenovo Q24h-10 23.8" 16:9 FreeSync IPS Monitor (Gray) - Manual (Page 16)

Chapter 2. 2-4
Using the On-Screen Display (OSD) controls
The settings adjustable with the user controls are viewed through the On-Screen Display (OSD), as
shown below.
To use the controls:
1. Press to open the main OSD menu.
2. Use or to move among the icons. Select an icon and press to access that function. If
there is a sub-menu, you can move between options using or , then press to select
that function. Use or to make adjustments. Press to save.
3. Press to move backwards through the sub-menus and exit from the OSD.
4. When un-OSD, press and hold for 10 seconds to lock the OSD. This will prevent
accidental adjustments to the OSD. When un-OSD, press and hold for 10 seconds to
unlock the OSD and allow adjustments to the OSD.
5. Enables DDC/CI by default. Use OSD Exit Key, press and hold the buttons for 10
seconds to disable/enable DDC/CI function. The words “DDC/CI Disable/DDC/CI/Enable"
shows on the screen.
6. The ENERGY STAR option resets all user settings to default values so that the monitor can
meet the requirements of Energy Star.
Energy Star is an energy saving program for consumer electronics led by the U.S. government.
It was launched in 1992 by EPA and DOE to reduce energy consumption and greenhouse gas
emissions. Energy Star logo is a symbol of energy conservation and environmental protection.
It improves the concept of energy efficiency of consumers and manufacturers, and effectively
guides the market.
The regulation of Energy Star improves energy efficiency and reduces air pollution by using
more energy-efficient equipment in homes, offices and factories. One way to achieve this
goal is to use management to reduce energy consumption when products are not in use.
The default settings for monitors conform to Energy Star certification. Any changes by users
for more features and functionalities may increase power consumption, which will exceed
the limitation of Energy Star’s standard. If the user changes the options related to energy
efficiency when using, such as brightness, color mode, etc., select All Reset Factory or choose
the Energy Star option, the power consumption will be restored to the energy efficiency
with Energy Star standard.
For more information, please refer to (www.energystar.gov/products). All products of
Energy Star will be posted online and can be accessed directly by governments, public
institutions and consumers.