Lenovo Q24h-10 23.8" 16:9 FreeSync IPS Monitor (Gray) User Manual
Page 27
Chapter 3. 3-5
Installing the monitor driver in Windows 10
To use the Plug and Play feature in Microsoft Windows 10, do the following:
1. Turn off the computer and all attached devices.
2. Ensure that the monitor is connected correctly.
3. Turn on the monitor and then turn on the computer. Allow your computer to boot into
Windows 10 operating system.
4. From the Lenovo websit find the
corresponding monitor driver and download it to a PC to which this monitor is connected
(such as a desktop).
5. On the Desktop, move mouse to bottom-left corner of screen, right-click to choose
Control Panel, then double click the icon of Hardware and Sound, and then click Display.
6. Click the Change the display settings tab.
7. Click the
Advanced Settings
button.
8. Click the
Monitor
tab.
9. Click the
Properties
button.
10. Click the
Driver
tab.
11. Click Update Driver, then click Browse the computer to find the driver program.
12. Select “
Let me pick from a list of device drivers on my computer
”.
13. Click the Have Disk button. By clicking the Browse button, browse and point to the
following path:
X:\Monitor Drivers\Windows 10
(where X indicates "the folder in which the downloaded driver is located" (such as a
desktop)
14. Select the “
Q24h-10.inf
” file and click the
Open
button. Click the
OK
button.
15. In the new window, select
Lenovo
Q24h-10
and click Next.
16. After the installation is complete, delete all downloaded files and close all windows.
17. Restart the system. The system will automatically select the maximum refresh rate
and corresponding Color Matching Profiles.
Note: On LCD monitors, unlike CRTs, a faster refresh rate does not improve display
quality. Lenovo recommends using either 2560 x 1440 at a refresh rate of 60 Hz, or
1920 x 1080 at a refresh rate of 60 Hz.