Sync cord (optional accessory), Wireless, Connecting your camera to the monolight – Impact VC-500WLN 500Ws Monolight User Manual
Page 11
11
The Impact Digital Monolight has two triggering options.
Sync Cord (Optional Accessory)
The back of your monolight has a 1/4
"
(6.35 mm) sync input, which is used for a
wired connection between your camera and the flash unit.
1. Insert the sync cable’s 1/4
"
end into the monolight’s
sync cable port.
2. Insert the PC connector end into your camera’s PC
socket. If your camera does not have a PC port, an
adapter will be required.
Wireless
Note:
The remote is included only with the two- and three-light kits. The
VC-500WLXMT remote can be purchased separately.
The Impact Digital Monolight has an integrated 2.4 GHz, 16-channel wireless
receiver. Using the included transmitter, you can wirelessly trigger your flash
unit from up to 328 feet (100 m) away. Line-of-sight is not required for your
monolights to communicate with the transmitter.
For instructions on how to operate your monolights with the transmitter, refer to
the transmitter’s user manual or the instructions in this manual.
Note:
You can attach your own wireless triggering system receiver to the Digital
Monolight via the sync port.
Connecting Your Camera to the Monolight