Impact VC-500WLN 500Ws Monolight - Manual (Page 14)

14
The VC-500WLN Monolight has a 250 W, 60 Hz user-replaceable modeling light
bulb.The modeling light’s power output is represented on the LED screen by a
1–6 numbered scale that can be adjusted by 0.1 increments.
This monolight has built-in soft-start circuitry, which ensures a long modeling
lamp life. When the monolight is powered on, the circuitry starts the monolight
at a minimum power output, then raises it incrementally until the desired power
output is reached.
To activate the modeling lamp, press and release the output adjustment dial.
The modeling light has two operating modes:
• In proportional mode, increasing or decreasing the flash power will
incrementally increase or decrease the modeling light brightness.
• In independent mode, the modeling light brightness can be set
independently of the flash without changing the flash output power.
Setting the Modeling Light Power Output