Slave and preflash settings – Impact VC-500WLN 500Ws Monolight User Manual
Page 16
16
The Impact Digital Monolight has seven optical slave/preflash modes.
Activate the slave mode by pressing the slave button once. The slave indicator
light will appear over the slave button. Press it again to turn it off.
To adjust the preflash settings, press and hold the slave button for four seconds.
Use the and buttons to toggle between preflash settings.
C0:
Using your master flash, release a test exposure.
The monolight will automatically memorize the
amount of preflashes fired.
C1:
The monolight will flash when it detects
another flash.
C2:
The monolight will trigger after one preflash.
C3:
The monolight will trigger after two preflashes.
C4:
The monolight will trigger after three preflashes.
C5:
The monolight will trigger after four preflashes.
C6:
The monolight will trigger after five preflashes.
C7:
The monolight will trigger after six preflashes.
Slave and Preflash Settings