Profoto A10 AirTTL-C Studio Light for Canon - Manual (Page 27)

A
10 Air
TTL
27
www.profoto.com
Continuous light
To turn on the continuous light on A10, press button [15].
To turn on continuous light on a specific group, first select a group and
then press button [15].
When the A10 continuous light is on, a white dot is displayed to the right
on the display and/or on the different groups.
Activate/deactivate flash head
The flash head can be deactivated without turning off the power of the
A10 unit. This is used when the A10 should work as a remote control for
off-camera flashes but no flash itself.
Press and hold the Continuous light button [15] to turn on/off the A10
lamp head.
Note:
The A10 flash head can also be activated/deactivated in the settings menu.
Lock user interface
A long push on the settings button [14] will lock the user interface. This
is indicated with a lock symbol. The flash operates normally, although
the user interface will not respond to button pushes until unlocked by
the user by another long push on the same button.