Profoto A10 AirTTL-C Studio Light for Canon - Manual (Page 46)

A
10 Air
TTL
46
www.profoto.com
Regulatory information
Compliance marking
Regulatory information, certification and compliance marks specific to
Profoto A10 AirTTL are available on the A10 AirTTL. It can be found both
on the A10 AirTLL unit label and in the settings menu. Go to Settings >
Regulatory information.
World-wide Usage of Radio Spectrum
The Profoto Air system operates on the license-free 2.4GHz ISM band
for SRD (Short Range Devices). This band may be used in most parts
of the world. Regional restrictions may apply.
Note:
Refer to national regulations for the region where the Profoto A10 AirTTL shall be
operated and make sure that they are followed.
EU Declaration of Conformity
Hereby, Profoto AB declares that the radio equipment type Profoto A10
AirTTL is in compliance with Directive 2014/53/EU.
The full text of the EU declaration of conformity is available at the
following internet address:
https://profoto.com/int/support/declaration-of-conformity
RF Power
In order to remain compliant with national regulations and restrictions,
please use the following RF POWER settings while operating your A10
in these countries. Please note that these are subject to change and you
may find updated information available for download at Profoto.com
COUNTRY CHANNEL RF POWER
USA/Canada CH 1 - 7, 9-20 P1
USA/Canada CH 8 P4
EU (and EES) CH1-20 P1
South Korea CH1-20 P5
China, Taiwan CH1-20 P3
To enter the RF SETTING menu, go to SETTINGS, hold down the B
button, and tap the C button.