Using viewnx 2, Copy pictures to the computer – Nikon D750 DSLR Camera (Body Only) User Manual
Page 294
266
Copy Pictures to the Computer
Before proceeding, be sure you have installed the software on
the supplied ViewNX 2 CD (
1
Connect the USB cable.
After turning the camera off and ensuring that a memory
card is inserted, connect the supplied USB cable as shown
and then turn the camera on.
Using ViewNX 2
A
Use a Reliable Power Source
To ensure that data transfer is not interrupted, be sure the camera
battery is fully charged.
A
Connecting Cables
Be sure the camera is off when connecting or disconnecting
interface cables. Do not use force or attempt to insert the
connectors at an angle.
D
During Transfer
Do not turn the camera off or disconnect the USB cable while
transfer is in progress.
D
USB Hubs
Connect the camera directly to the computer; do not connect the
cable via a USB hub or keyboard.