Nikon D750 DSLR Camera (Body Only) User Manual
Page 385
357
t
Bracketing burst
If the
Fn
button is pressed while exposure, flash, or
ADL bracketing is active in single frame or quiet
shutter-release mode, all shots in the current
bracketing program will be taken each time the
shutter-release button is pressed. If white
balance bracketing is active or continuous release
mode (mode
U
,
T
or
M
) is selected, the camera
will repeat the bracketing burst while the shutter-
release button is held down.
e
+ NEF (RAW)
If image quality is set to
JPEG fine
,
JPEG normal
,
or
JPEG basic
,
e
will be displayed in the
viewfinder and an NEF (RAW) copy will be
recorded with the next picture taken after the
Fn
button is pressed (the original image quality
setting will be restored when you remove your
finger from the shutter-release button). To exit
without recording an NEF (RAW) copy, press the
Fn
button again.
L
Matrix metering
Matrix metering is activated while the
Fn
button is
pressed.
M
Center-weighted
metering
Center-weighted metering is activated while the
Fn
button is pressed.
N
Spot metering
Spot metering is activated while the
Fn
button is
pressed.
4
Highlight-
weighted
metering
Highlight-weighted metering is activated while
the
Fn
button is pressed.
9
Viewfinder grid
display
Press the
Fn
button to turn the framing grid
display in the viewfinder on or off (
m
Viewfinder
virtual horizon
Press the
Fn
button to view a virtual horizon
display in the viewfinder (
n
MY MENU
Pressing the
Fn
button displays “MY MENU”
(
Option
Description