Nikon D750 DSLR Camera (Body Only) User Manual
Page 479
451
❚❚
Manual Cleaning
If foreign matter can not be removed from the low-pass filter
using the
Clean image sensor
option in the setup menu
448), the filter can be cleaned manually as described below.
Note, however, that the filter is extremely delicate and easily
damaged. Nikon recommends that the filter be cleaned only by
Nikon-authorized service personnel.
1
Charge the battery or connect an AC adapter.
A reliable power source is required when inspecting or
cleaning the low-pass filter. Turn the camera off and insert a
fully-charged battery or connect an optional AC adapter and
power connector. The
Lock mirror up for cleaning
option is
only available in the setup menu at battery levels over
J
.
2
Remove the lens.
Turn the camera off and remove the lens.
3
Select
Lock mirror up for cleaning
.
Highlight
Lock mirror up for
cleaning
in the setup menu and press
2
.