Ospeaker select, Oadjust eq, Ocurve copy – Marantz NR1510 5.2-Channel Network A/V Receiver User Manual
Page 133: Oset defaults
Advertising
o
Speaker Select
Select whether to adjust tones for individual speakers or for all
speakers.
All:
Adjust all speaker tones together.
Left/Right
(Default) :
Adjust the left and right speaker tones
together.
Each:
Adjust the tone for each speaker.
o
Adjust EQ
Adjust tonal balance for each frequency band.
1. Select the speaker.
2. Select the adjustment frequency band.
63 Hz / 125 Hz / 250 Hz / 500 Hz / 1 kHz / 2 kHz / 4 kHz / 8 kHz /
16 kHz
3. Adjust the level.
–20.0 dB – +6.0 dB (Default : 0.0 dB)
o
Curve Copy
Copy the Flat correction curve created in Audyssey
®
Setup.
0
“Curve Copy” is displayed after Audyssey
®
Setup has been performed.
0
“Curve Copy” cannot be used when using headphones.
o
Set Defaults
The “Manual EQ” settings are returned to the default settings.
133
Advertising