Marantz NR1510 5.2-Channel Network A/V Receiver - Manual (Page 135)

o HDMI PassThrough
Selects how this unit will transmit HDMI signals to the HDMI output in
standby power mode.
On
(Default):
Transmits the selected HDMI input
through this unit’s HDMI output when this
unit is in standby power mode.
Off:
No HDMI signals are transmitted through
this unit’s HDMI output in standby power
mode.
o Pass Source
Sets the HDMI connector that inputs HDMI signals when in standby.
Last:
The most recently used input source will
go into standby mode.
CBL/SAT /
Blu-ray/DVD /
Game / AUX /
Media Player
(Default : CBL/SAT) ：
Pass through the selected input source.
0
“Pass Source” can be set when “HDMI PassThrough” is set to “On” or “HDMI
Control” is set to “On”. (“ HDMI PassThrough ” ( v p. 135), “ HDMI
Control ” ( v p. 136))
o RC Select
Set whether to allow this unit to be turned on by the input source select
button on the remote control when this unit is on standby.
Power On+Source
(Default):
The power of this unit is turned on and
the input source changes.
Source Only:
The HDMI input source changes while
this unit is on standby. The power display
of this unit blinks when the input source
select button of the remote control is
pressed.
0
“RC Select” can be set when “HDMI Control” is set to “On” or “HDMI
PassThrough” is set to “On”. (“ HDMI PassThrough ” ( v p. 135), “ HDMI
Control ” ( v p. 136))
Contents Connections Playback Settings Tips Appendix
135
Front panel Display Rear panel Remote Index