Marantz NR1510 5.2-Channel Network A/V Receiver - Manual (Page 59)

Pairing with other Bluetooth devices
Pair a Bluetooth device with this unit.
1
Activate the Bluetooth settings on your mobile device.
2
Press and hold Bluetooth on the remote control unit for
at least 3 seconds.
This unit will go into the pairing mode.
3
Select this unit when its name appears in the list of
devices displayed on the screen of the Bluetooth
device.
0
This unit can be paired with a maximum of 8 Bluetooth devices. When a 9th
Bluetooth device is paired, it will be registered in place of the oldest registered
device.
0
You can also enter pairing mode by pressing the OPTION button when the
Bluetooth playback screen is displayed and selecting “Pairing Mode” from the
displayed option menu.
NOTE
0
To operate the Bluetooth device with the remote control of this unit, the Bluetooth
device needs to support the AVRCP profile.
0 The remote control of this unit is not guaranteed to work with all Bluetooth devices.
0
Depending on the type of Bluetooth device, this unit outputs audio that is coupled
to the volume setting on the Bluetooth device.
o Operations accessible through the option
menu
0
“Pairing with other Bluetooth devices” ( v p. 59)
0
“Adjusting the volume of each channel to match the input source (Ch
Level Adjust)” ( v p. 91)
0
“Adjusting the tone (Tone)” ( v p. 92)
0
“Displaying your desired video during audio playback (Video
Select)” ( v p. 93)
Contents Connections Playback Settings Tips Appendix
59
Front panel Display Rear panel Remote Index