FUJITSU DL3800 - Manual (Page 200)

C-18 User's Manual
COMMAND SETS (DPL24C PLUS)
Function Command
Condensed characters on SI or ESC SI
Condensed and elite characters off DC2
Subscript or superscript printing on ESC S (n)
(subscript: n = 1, superscript: n = 0)
Subscript and superscript printing off
ESC T
Underline on/off (on: n = 1, off: n = 0) ESC - (n)
Overline on/off (on: n = 1, off: n = 0) ESC (n)
Horizontal Control
Space
SP
Backspace BS
Carriage return CR
Elite characters on ESC :
Proportionally spaced characters on/off ESC P (n)
(on: n = 1, off: n = 0)
Vertical Control
Line feed
LF
Form feed FF
Advance paper n/216 inch (1
≤
n
≤
255) ESC J (n)
Advance paper n/180 inch (in AG mode) ESC J (n)
(1
≤
n
≤
255)
Set line spacing to 1/8 lines ESC 0
Set line spacing to 7/72 inch ESC 1
Set line spacing to n/216 inch ESC 3 (n)
(0
≤
n
≤
255)
Set line spacing to n/180 inch (in AG mode) ESC 3 (n)
(0
≤
n
≤
255)
Preset line spacing to n/72 inch ESC A (n)
(1
≤
n
≤
255)
Preset line spacing to n/60 inch (in AG mode) ESC A (n)
(1
≤
n
≤
255)
Set line spacing to 1/6 inch or to the value ESC 2
preset by line spacing command ESC A (n)
COMMAND SETS (IBM XL24E)
#C Appendix C 2000.09.20, 2:48 PM 18