FUJITSU DL3800 - Manual (Page 68)

PAPER HANDLING
User's Manual 3-18
3. Pull up both ends of the tractor unit to detach the catches of the
tractor unit from the support studs. Then pull the tractor unit.
4. Return the cut sheet stand and the back cover to their original
position.
Removing the tractor unit
5. (80-column printer)
Raise the rear edge of the separator and remove it. Pull the bail
roller unit up to detach the catches of the bail roller unit from
the support studs, then remove the bail roller unit. Reinstall the
separator and pull it to the front of the printer.
Bail roller unit
Removing the bail roller unit
Support studs
#03 Chapter 3 2000.09.20, 2:33 PM 18