Multi-Tech Systems MTS2SA-T - Manual (Page 18)

Chapter 4 – Command Line Interface (CLI)
Multi-Tech Systems, Inc. MultiConnect Serial-to-Serial Adapter User Guide (S000354A) 18
General Commands – Setup
Command Syntax user password <username> <new password>
Description Change the password for a user.
Default Value NA
Success OK
Error 1. Too few arguments
“Too few arguments. Possible value(s) are username followed by
password”
2. Unable to change the password
“Password does not match
Unable to change user <username> password”
Command Syntax set operation-mode <modem/ipmodule>
Description modem - In the modem mode, the target functions like a modem
ipmodule - In the ipmodule mode, all the functional features of
MultiConnect IP can be achieved.
Default Value Ipmodule
Success OK
Error 1. Too few arguments
"Too few arguments. Possible argument(s) are modem and ipmodule
2. Invalid string
"Invalid argument "string"
Valid argument(s) are modem and ipmodule
Command Syntax set boot-messages <enable/disable>
Description enable - Prints the boot-messages during module boot-up.
disable - Suppresses the boot-messages during module boot-up.
Default Value Enable
Success OK
Error 1. Too few arguments
"Too few arguments. Possible argument(s) are disable and enable
2. Invalid string
"Invalid argument "string"
Valid argument(s) are disable and enable
Command Syntax set date <DD/MM/YYYY>
Description Sets the system date.
Default Value Jan 1 1970
Success OK
Error 1. Too few arguments
Usage: set date DD/MM/YYYY
Type 'set date ?' for more information
Error: Date in DD/MM/YYYY format
Too few arguments. Possible argument(s) are
ip ppp date
serial login time