Multi-Tech Systems MTS2SA-T - Manual (Page 49)

Chapter 4 – Command Line Interface (CLI)
Multi-Tech Systems, Inc. MultiConnect Serial-to-Serial Adapter User Guide (S000354A) 49
SMTP Client Commands – Setup
SMTP Client Commands
The commands in this section are listed in the order in which they might be used.
Command Syntax set send-mail smtp-server-name <name/ip-address>
Description Sets the SMTP server name or IP address. Server names must be such
that they can be resolved by the DNS.
Default Value NULL
Success OK
Error 1. Too few arguments
“Usage: set send-mail smtp-server-name <name/ip-address>
Type 'set send-mail smtp-server-name ?' for more information”
2. Invalid name/IP address
“ERROR: Invalid SMTP Server Name/IP Address”
Command Syntax set send-mail smtp-server-port <port>
Description Sets the SMTP Server port.
Default Value 25
Success OK
Error 1. Too few arguments
“Usage: set send-mail smtp-server-port <port>
Type 'set send-mail smtp-server-port ?' for more information”
Command Syntax set send-mail host-name <host name>
Description Sets the SMTP Client host name.
Default Value NULL
Success OK
Error 1. Too few arguments
“Usage: set send-mail host-name <host name>
Type 'set send-mail host-name ?' for more information”
Command Syntax set send-mail from-address-identity <name>
Description Sets the ‘From:’ description in the email header as <name>.
Default Value NULL
Success OK
Error 1. Too few arguments
“Usage: set send-mail from-address-identity <name>
Type 'set send-mail from-address-identity ?' for more information”
Command Syntax set send-mail from-address <email-address>
Description Sets the email-address as the Default From address information.
Default Value NULL
Success OK
Error 1. Too few arguments
“Usage: set send-mail from-address <email-address>
Type 'set send-mail from-address ?' for more information”