Multi-Tech Systems MTS2SA-T User Manual
Page 61
Chapter 5 – Setting Country or Region Codes Using the CLI
Multi-Tech Systems, Inc. MultiConnect Serial-to-Serial Adapter User Guide (S000354A)
61
Chapter 5 – Setting Country or
Region Codes Using the CLI
The Default Country or Region Code is B5.
If You Want to Change the Country or Region Code, Use the Command Line Interface:
Command Syntax
set serial s1 modem country-code value <value>
Description
Sets the modem country code value to <value>.
This command is valid only for port S1. Applicable only if the country-code
type is set to code.
Default Value
-
Success
OK
Error
1. Too few arguments
“Usage: set serial s1 modem country-code value <value>
Type ‘set serial s1 modem country-code value ?’ for more information”
Notes:
There is no validation on the country code value.
To View Country or Region Code:
Command Syntax
show serial modem country code
This command is supported on S1 only.
Description
Displays the supported country codes for this product.
Default Value
-
Success
OK
Error
1. Too few arguments
Possible value(s) are
statistics
country-code
configuration chat-script
modem-configuration
Country or Region Codes –
The list below is an example of the country or region code settings for the
countries or regions that Multi-Tech currently supports. For your country or region code, please check with Multi-
Tech Technical Support
Country/Region
Value (Country Code)
Country/Region
Value (Country Code)
Argentina 07
Australia 09
Austria FD
Belgium
FD
Brazil 16
Canada B5
China B5
Cyprus FD
Czech Republic FD
Denmark
FD
Finland
FD
France
FD
Germany FD
Greece
FD
Hong Kong
99
Hungary FD
Iceland FD
Indonesia 99
Ireland
FD
Italy
FD
Japan 00
Korea B5
Liechtenstein FD
Luxembourg FD
Mexico B5
Netherlands
FD
New Zealand
7E
Norway
FD
Philippines B5
Portugal
FD
Slovak Republic
FD
Spain FD
Sweden
FD
Switzerland
FD
Taiwan
FE
United Kingdom
FD
United States
B5