5 telnet interface – Mocomtech CDM-570 User Manual
Page 272
CDM-570/570L Satellite Modem with Optional IP Module
Revision 4
Ethernet Management (Base Modem)
MN/CDM570L.IOM
The following tables are the Alarms and Faults v1 traps / v2 notifications that the modem
supports.
Alarms and Faults SNMPv1 traps:
cdm570LTxTrafficAlarm
6247242
cdm570LUnitAlarm
6247241
cdm570LRxTrafficAlarm
6247243
cdm570LODUAlarm 6247244
Alarms and Faults SNMPv2 notifications:
cdm570UnitAlarm
1.3.6.1.4.1.6247.24.2.0.1
cdm570TxTrafficAlarm
1.3.6.1.4.1.6247.24.2.0.2
cdm570RxTrafficAlarm
1.3.6.1.4.1.6247.24.2.0.3
cdm570LODUAlarm
1.3.6.1.4.1.6247.24.2.0.4
For further details regarding the use of this interface please refer to Chapter 19 - SNMP
Interface.
14.5 Telnet
Interface
The modem provides a Telnet interface for two primary functions:
• Equipment M&C via the standard equipment Remote Control protocol.
• Equipment M&C via Comtech Monitor and Control System (CMCS) application.
The Telnet interface requires user login at the Administrator level and Read/Write
level.
14–6