Environmental, Installation, Telecommunications terminal equipment directive – Mocomtech CDM-570 User Manual

Page 96: Xviii

Advertising
background image

CDM-570/570L Satellite Modem with Optional IP Module

Revision 4

Preface

MN/CDM570L.IOM

xviii

Environmental

The CDM-570/570L must not be operated in an environment where the unit is exposed to
extremes of temperature outside the ambient range 0 to 50°C, precipitation, condensation,
or humid atmospheres above 95% RH, altitudes (non-pressurized) greater than 2000
meters, excessive dust or vibration, flammable gases, corrosive or explosive atmospheres.

Operation in vehicles or other transportable installations that are equipped to provide a
stable environment is permitted. If such vehicles do not provide a stable environment,
safety of the equipment to EN60950 may not be guaranteed.

Installation

The installation and connection to the line supply must be made in compliance to local or
national wiring codes and regulations.

The CDM-570/570L is designed for connection to a power system that has separate
ground, line and neutral conductors. The equipment is not designed for connection to a
power system that has no direct connection to ground.

The CDM-570/570L is shipped with a line inlet cable suitable for use in the country of
operation. If it is necessary to replace this cable, ensure the replacement has an equivalent
specification. Examples of acceptable ratings for the cable include HAR, BASEC and
HOXXX-X. Examples of acceptable connector ratings include VDE, NF-USE, UL, CSA,
OVE, CEBEC, NEMKO, DEMKO, BS1636A, BSI, SETI, IMQ, KEMA-KEUR and
SEV.

International Symbols:

Symbol Definition

Symbol

Definition

~

Alternating Current

Protective Earth

Fuse

Chassis Ground

Telecommunications Terminal Equipment Directive

In accordance with the Telecommunications Terminal Equipment Directive 91/263/EEC,
this equipment should not be directly connected to the Public Telecommunications
Network.

Advertising
This manual is related to the following products: