Meco 6212S00T91 - Manual (Page 12)

12
Tank Heat Shield
Step 10
Main Burner Assembly
A. Slide the burner tubes down through the indicated
holes in the bowl and align the holes in the burner
brackets with the holes in the Bowl.
B. From underneath the Bowl, fasten the Main Burner
to the Bowl with 2) #5 x .31” Tapping Screws.
B
#5 x .31” Tapping Screw
2 pcs.
A
Step 10A (6512 ONLY)
Tank Heat Shield Attachment
Fasten the Tank Heat Shield to the bottom of the Bowl with two
1/2-20 x .39” bolts with fiber washers and two 1/4-20 nuts.
The Bolts with fiber washers are installed inside the bowl with
the nuts on the underside of the Tank Heat Shield.
1/4-20 Nut
2 pc
1/4-20 x .39” Bolt
with Fiber Washer
2 pcs