Meco 6212S00T91 - Manual (Page 9)

9
A
B
A
B
4 - 1/4-20 x .39” Bolt
2 - 1/4-20 x 1.1” Bolt
Step 5
Crossbrace & Right Tube Brace Assembly
A. Assemble one Crossbrace to the inside of the back legs as
shown with the short flange of the Crossbrace to the top and
facing inwards. Install 4) 1/4-20 x .39” bolts through the holes
in the Crossbrace and into the threaded inserts in the inside
face of the legs.
B. Install the Right Tube Brace between the right legs and
fasten in place with a 1/4-20 x 1.1” bolt through the outside
of each leg and into the ends of the Tube Brace.
Step 6
Tank Locking Plate & Center Crossbrace Assembly
A. Orient the Tank Locking Plate as shown with the edge flanges
facing outward and the edge notches to the bottom. Install two
1/4-20 x .59” Thumbscrews through the vertical slots in the Tank
Locking Plate and into the Tank Side Brace.
B. Install the Center Brace between the front and back bottom
Crossbraces. The Center Brace will be under the short flanges of
the Crossbraces with the open side down. Fasten in place with two
5/32-30 x .39” bolts through the flanges of the Crossbraces.
Right Tube Brace
Tank Locking Plate
Center Crossbrace
Crossbrace
1/4-20 x .59” Thumbscrew
1/4-20 x .39” Bolt
4 pcs
1/4-20 x 1.1” Bolt
2 pcs
5/32-30 x .39” Bolt
2 pcs