Meco 6212S00T91 - Manual (Page 17)

17
Step 17
Hood Handle Assembly
Model 6212: Attach the Hood Handle to the Hood with 2) 1/4-20 x .39” Bolts and Fiber Washers. Place Heat Baffles
between the Handle and the Hood, orienting baffles so they align with the end of the handle.
Model 6512: Attach the Hood Handle and the Hood Handle Heat Shield to the Hood with 2) 1/4-20 x .39” Bolts.
The Heat Shield is placed inside the Hood with the raised areas around the holes against the hood. The bolts are in-
serted through the Heat Shield then Hood and into the end of the Hood Handle. No Fiber Washers or Thermal Baffles.
Step 18
Hood/Hinge Assembly
Place Hood on Bowl and align hinges. Hood hinge legs insert between Bowl hinge legs. Install Hood Hinge Axle
through holes in hinge legs, inserting towards the center of the grill. Fasten in place by inserting Axle Pin through small
hole in Axle. Repeat for other Hinge.
Hood Hinge Axle
2 pc
Axle Pin
2 pc
1/4-20 x .39” Bolt
2 pc
Fiber Washer
2 pc (6212 only)
Thermal Baffle
2 pc (6212 only)
1/4-20 x .39” Bolt
Fiber Washer
Thermal Baffle
1/4-20 x .39” Bolt
Hood Handle
Heat Shield
6512 Only
Model 6212
Model 6512