Meco 6212S00T91 - Manual (Page 16)

16
Step 15
Side Table Assembly
Place the Side Table flanges with holes around the outside of the U-Frame and align the holes. Insert a 1/4-20 x 1.2”
Stair Screw through each of the four Side Table holes and then through the U-Frame. Fasten each securely with a
1/4-20 Nut. Repeat for other Side Table. (Note: Side Tables are interchangable)
Step 16
Hood Hinge Half Assembly
Attach the Hood Hinge Halves to the Hood, oriented with the open side down. Install two 1/4-20 x .39” Bolts with
Fiber Washers through the inside of the Hood and then the Hood Hinge Half. Fasten in place with two Nuts. Repeat
for other hinge half.
1/4-20 Nut
4 pc
1/4-20 x .1.2”
Stair Screw
1/4-20 Nut
1/4-20 Nut
Hood Hinge
Half
1/4-20 x .39” Bolt
Fiber Washer
1/4-20 x .39” Bolt
with Fiber Washer
4 pcs
1/4-20 Nut
8 pc
1/4-20 x .1.2”
Stair Screw
8 pcs