Minicom Advanced Systems Minicom Smart 116 IP - Manual (Page 18)

SMART 108/116 IP
17
Notes
Firewall or router security access list must enable inbound communication through
the selected TCP ports for the Smart 108/116 IP’s IP address. (Default TCP port is
900, default web interface TCP port is 443).
For Client computer access from a secured LAN, the selected ports should be open
for outbound communication.
12.1 LAN
Under LAN in Figure 13, is the following:
Enable DHCP – When a DHCP server is active on the same network to which
Smart 108/116 IP is connected, DHCP provides automatic IP assignment.
When DHCP is disabled – (Recommended) – You can assign a fixed IP address to
the Smart 108/116 IP.
Consult your Network Administrator regarding the use of the DHCP. Note! Where
you have access to the server – your configured (or default) Smart 108/116 IP
device name will appear on the DHCP server’s interface, making it easy to locate.
When DHCP is disabled, enter the IP Address, Subnet Mask, and Default
Gateway for LAN 1, as given by your Network Administrator.