Minicom Advanced Systems Minicom Smart 116 IP - Manual (Page 42)

SMART 108/116 IP
41
25.3.1 The General settings
With the red line on the word GENERAL, press Enter. The General settings
window appears see Figure 41.
Figure 41 General Settings window
From this window you can do the following:
25.3.1.1 Security
The OSD comes with an advanced password security system that contains 3
different security levels. Each security level has different access rights to the
system.
These levels are as follows:
25.3.1.2 Administrator (Status A)
The Administrator can:
· Set and modify all Passwords and security profiles
· Fully access any computer
· Use all OSD functions
25.3.1.3 Supervisor (Status S)
The Supervisor can:
· Fully access any computer
· Access the following OSD functions only –F4 Scan, F5 Tune and F6
Moving the Confirmation label.
25.3.1.4 User (Status U)
There are 6 different Users in the Smart 108/116 IP system. Each User has a Profile
set by the Administrator that defines the access level to different computers. There
are 3 different access levels - explained on page 45.