Minicom Advanced Systems Minicom Smart 116 IP - Manual (Page 50)

SMART 108/116 IP
49
26. Upgrading the Smart 108/116 IP firmware
With the Smart 108/116 IP Switch Update software you can upgrade the firmware
for the:
· Switch processors
· RICC/ROCs
The Update software enables you to add new features and fix bugs in a quick and
efficient manner. You can also return the OSD to the factory default settings via the
Update software. Install the Update software on any computer, even one not part of
the Smart 108/116 IP system.
26.1 Obtaining the Update software and latest firmware
The Update software and latest firmware for your system are located on our
website at:
http://www.minicom.com/phandlc.htm
The firmware can be downloaded in different ways:
Complete Firmware Package – This includes the firmware for all Smart switches
and RICCS and ROCS.
Firmware Package for Smart Switch models - This includes the firmware for all
Smart switches.
Smart CAT5 Switch Firmware - There are multiple hardware versions of Smart
CAT5 Switch units, each with version specific firmware. On the web page find the
description and table that identifies your version.
Firmware Package for RICC and ROC models – Download a firmware package
for RICC and ROC models (see the table on the web page for the Supported
RICC/ROC models). Or search for and download the specific RICC/ROC models
with the correct firmware version.
26.2 System requirements for the Update software
· Pentium II class computer with 256 MB RAM and 10 MB free Hard Drive
space.
· Free Serial port.
· Windows 2000 or later.
26.3 Connecting the Smart 108/116 IP System
To update the firmware the Smart 108/116 IP system must be connected and
switched on.