Minicom Advanced Systems Minicom Smart 116 IP - Manual (Page 43)

USER GUIDE
42
25.3.1.5 Activating password protection
By default OSD access is not password protected. Only the Administrator can
password-protect the OSD or disable password protection.
To do so:
1. In the General settings window navigate to the Security line.
2. Press the Space bar to toggle between Security On and Off. The password
dialog box appears.
3. Type the Administrator’s password (default is “admin”).
4. Press Enter. The new security status is set.
25.3.1.6 Changing the OSD hotkey
By pressing Shift, Shift the OSD appears. You can replace Shift, Shift with any of
the following:
· Ctrl, Ctrl
· Ctrl, F11
· Print Screen
To change the hotkey:
1. Navigate to the Hotkey line.
2. Press the Space bar to toggle between options. To display the OSD in future
press the new hotkey.
25.3.1.7 Autoskip
With the Autoskip feature, the arrow keys only access the active computer lines on
the OSD. When Autoskip is Off, The arrow keys access both active and inactive
computer lines.
To change the Autoskip setting:
1. Navigate to the Autoskip line.
2. Toggle between the options using the Space bar.
25.3.1.8 Serial port
This option is disabled in Smart 108/116 IP. Leave this option on its default setting
ON.