Minicom Advanced Systems Minicom Smart 116 IP - Manual (Page 54)

SMART 108/116 IP
53
Figure 51 Hardware version report
26.7.2 RICC/ROC version
Before you can tick a RICC/ROC, you must unselect the 108/116 IP Switch check
box.
To verify the RICC/ROC version number:
1. Check one or more or all of the RICC/ROCs.
2. Click . The firmware version number appears.
3. Click . The hardware version number appears.
When “Not responding” appears, there is no computer connected, or it is switched
off.
26.8 Obtaining new firmware
Download the latest firmware for your system from www.minicom.com .
26.8.1 Updating the firmware
Warning!
Never switch off any computer connected to the Smart 108/116 IP system
during the updating process.
To update the firmware:
1. Select the option to update Smart 108/116 IP switch or the RICC/ROCs.
2. From the File menu, choose Open. The Open dialog box appears. See
Figure 52. The Smart 108/116 IP switch update is a .min file. The
RICC/ROC update is a .hex file.
3. Navigate to the folder that contains the firmware update file. You may only
see the files that match the file selection mask. When the firmware is
contained in a Firmware Package, select the package. The package comes