Schneider Electric 890USE17700 - Manual (Page 84)

STB NIP 2212 Web Server
84 890USE17700 April 2004
About the
Reboot Option The reboot operation will configure the STB NIP 2212 with a role name assigned on
the web. Information about the reboot operation appears in the following figure:
Deleting a Role
Name You must delete a role name before you can assign a configured IP address or the
default IP parameters. Use the following steps:
Step Action
1 Set the lower rotary switch to an INTERNAL position (See Physical Description,
p. 28), and power cycle the STB NIP 2212.
2 Open the STB NIP 2212 web site.
3 Click on the Configuration tab to display the Configuration menu.
4 Select the Role Name option.
5 Highlight the role name to select it. Then press the Delete key on your keyboard.
6 Click on the Save button.
Note: The role name is deleted from Flash memory.