Aaa profile, Aaa profile -12 – Kentrox AI232 User Manual
Page 184
AI232 Version 9.6x User’s Guide
AI232 Commands: aaa profile
8-12
aaa profile
Description
This command associates a custom profile with a privilege level or range of privilege
levels. The following rules apply:
z
TACACS+ privilege levels range from 0 to 15.
z
Custom profiles can be associated with privilege levels 2 through 14.
z
Privilege levels 2 through 14 default to the management system profile.
z
Privilege levels 0, 1, and 15 are reserved for the Status, Management, and
Supervisor system profiles (respectively).
For information on creating custom profiles, refer to command
Privilege levels are used only if the authorization method is set to
priv-lvl
. The only
exception to this occurs under all of the following conditions:
1. The authentication server returns a privilege level.
2. The authorization server cannot be reached.
3. The authorization is set to per-command and fallback is enabled.
For information on configuring the authorization method, refer to command
.
Command Type
shell
Formats
aaa profile {
priv_range
} {
profile_name
| default }
Parameters
Command Defaults
No associations configured
priv_range
Defines the range of privilege levels that will be associated with
the profile. Individual values are separated by commas (,) and
hyphens (-). For example,
1,4-6
specifies privilege levels 1, 4, 5,
and 6.
profile_name
Specifies the name of an existing profile.
default
Removes the association between a range of privilege levels and
a profile.