Staeia, Staeia -89 – Kentrox AI232 User Manual
Page 261
AI232 Version 9.6x User’s Guide
AI232 Commands: staeia
8-89
staeia
Description
This command displays the status of the EIA leads.
Command Types
shell and winslc
Formats
For the shell command:
staeia {
link_range
| * }
For the winslc command:
winslc
baseport
staeia {
link_range
| * }
Parameters
Examples
This example displays the status of the EIA leads for links
1
to
5
.
link_range
Defines a link or range of links. Valid values are 1 to 32. Individual
values are separated by commas (,) and hyphens (-). For example,
1,4-6
specifies links 1, 4, 5, and 6.
*
Specifies all links.
baseport
Defines the baseport of AI232.
[232] staeia 1-5
Link Type Status IN OUT
DSR DCD CTS DTR RTS
1: ASY Disabled
2: ASY Enabled - - - + +
3: ASY Enabled - - - + +
4: ASY Enabled - - - + +
5: ASY Disabled
[232]
Column
Description
DSR
DSR is an incoming EIA lead control signal. The plus symbol (
+
)
indicates that this lead is asserted. The minus symbol (
-
) indicates that
the lead is negated.