Shell/ftp options, Shell/ftp options -17 – Kentrox AI232 User Manual
Page 63
AI232 Version 9.6x User’s Guide
System Configuration: TACACS+ Configuration
4-17
5. For
04 Primary Server Secret
, enter
4,
and the password. The default is
applied
.
6. Repeat steps 2 through 5 for the secondary server settings.
This example displays:
z
01*Primary Server Status
set to
ENABLED
z
02 Primary Server IP Address
set to
050.023.156.011
z
03 Primary Server Port
set to
122
z
04 Primary Server Secret
set to
hilltop
.
Shell/FTP Options
Description
This item sets the Shell/FTP option for TACACS+ as one of the following:
z
Enabled
—Enables TACACS+ login.
z
Disabled
—Disables TACACS+ login.
z
Local fallback
—Enables TACACS+ login, but resorts to local login if the
TACACS+ login fails.
Note: RADIUS and TACACS+ cannot both be configured at the same time.
Attempting to do this generates an error.
Menu Item Type
Toggle
Configuration in the AI198 Menu System
Important: Configuration of the shell/FTP TACACS+ option results in privilege level
authorization and supersedes any TACACS+ configuration on the AI232
card.
To configure the shell/FTP TACACS+ option:
1. Access Menu 4.2.14-2.4.
2. For
09*Shell/FTP TACACS Option
, enter
9
to select
ENABLED
,
DISABLED
, or
LOCAL
FALLBACK
. The default is
DISABLED
.
>4,hilltop
Menu 4.2.14-2.4
01*Primary Server Status (Enabled, Disabled)--------------------------- ENABLED
02 Primary Server IP Address------------------------------------050.023.156.012
03 Primary Server Port (1..65535)-----------------------------------------00122
04 Primary Server Secret------------------------------- hilltop