Radius configuration, Server settings, Radius configuration -12 – Kentrox AI232 User Manual
Page 58: Server settings -12
AI232 Version 9.6x User’s Guide
System Configuration: RADIUS Configuration
4-12
RADIUS Configuration
RADIUS authentication verifies user login information against valid user information in
a database on a centralized RADIUS authentication server. A primary and secondary
RADIUS server are configurable to provide secure access for an entire AI232
network. AI232 RADIUS authentication is available for Telnet, asynchronous, and
synchronous ports. The following menu items can be configured for RADIUS:
z
z
Server Settings
Description
The RADIUS server settings are configured using four menu items for the primary and
secondary server. The configurable values are:
z
Primary/secondary server status
—Enables or disables the primary or secondary
server.
z
Primary/secondary server IP address
—Defines an IP address for the primary or
secondary server.
z
Primary/secondary server port
—Defines the port number for the primary or
secondary server.
z
Primary/secondary server secret
—Defines a password for the primary or secondary
server.
Menu Item Types
Toggle for primary/secondary server status
Data for primary/secondary server IP address, server port, and server secret
Configuration in the AI198 Menu System
Note: RADIUS and TACACS+ cannot both be configured at the same time.
Attempting to do this generates an error.
To configure the RADIUS server settings:
1. Access Menu 4.2.14-2.2.
2. For
01*Primary Server Status
, enter
1
to select
ENABLED
or
DISABLED
. The default is
DISABLED
.
3. For
02 Primary Server IP Address
, enter
2,
and the desired IP address. The default
is
0.0.0.0
.