Kentrox AI232 - Manual (Page 56)

AI232 Version 9.6x User’s Guide
System Configuration: General System Properties Configuration
4-10
This example displays TCP Default Window Size set to 1024 and TCP Send Ahead set to
Enabled .
Telnet Port
Description
This item sets the Telnet port value for AI232.
Menu Item Type
Data
Configuration in the AI198 Menu System
1. Access Menu 4.2.14.
2. For 15 Telnet port number , enter 15, and the desired port number value. Valid
values are 1 to 65534. The default is 23 .
This example displays 15 Telnet port number set to 122 .
Configuration in the AI232 Local Menu System
1. Access the System Menu.
2. For Telnet Port , enter the desired value. The default is 23 .
System Menu
System Prompt . . . ............................................. NewPrompt
Destination Menu Break Sequence . . . . . . . .................. <c>^[1,5]x
TCP Default Window Size . . . . . . . . . . 200 512 [1024] 2048
TCP Send Ahead . . . . . . . . . . . . . . . . . . [Enabled] Disabled
>15,122
Menu 4.2.14 pg 1
01 IP Address (0.0.0.0 - 255.255.255.254)-----------------------010.040.057.012
02 IP Address Range (1 - 255)-----------------------------------------------001
03 IP Subnet Mask (0.0.0.1 - 255.255.255.254) ------------------255.255.000.000
04 Primary IP Router Address (0.0.0.0 - 255.255.255.254) -------010.040.000.001
05 Secondary IP Router Address (0.0.0.0 - 255.255.255.254) -----000.000.000.000
06*TCP Default Window Size (200, 512, 1024, 2048)--------------------------1024
07*TCP Send Ahead----------------------------------------------------------- ON
08+SNMP System Parameters
12+Link Setup
14+IP Static Routes
15 Telnet port number (1..65534)------------------------------------------00122